[Composite] [Glass] [PAS/Stud Partitioning] [Plasterboard/Drywall] [Timber/Wood] [Steel] [Partitioning Manufacturers]
Partitioning Types - office partitions
Newbury Interiors offers the following types of office partitioning:
Composite Partitions
Composite office partitions are an aluminium framed system constructed from panels manufactured with outer layers, normally lightweight plasterboard, bonded to core such as paper egg crate. This aluminium framework is 50 mm thick and can be SAA or colour coated to finish. Glazed windows can be formed, single or double glazed, utilising clip-in PVC glazing beads.
Composite partitioning is a widely used partitioning type as it is quick, cost effective and relocatable basic system. On the other hand, it is neither fire rated nor does it provide much acoustic insulation.
Komfort 600, Kameo 50, CCF Excel, Avanti Matrix and Tenon Fireplus are examples of this type of partitioning.
Glass Partitions
Glass or silicon glazed partitions are constructed entirely of glass held in place with head and floor detail and with joints filled with silicon mastic. Glass partitioning systems are available that produce a frameless appearance to the partitioning. Curved or straight panels can be installed.
Glass partitions creates a light and airy environment, ideal for modern open plan offices.
This type of partitioning is normally constructed as single glazed units. Double glazed glass partitions have the advantage of better sound insulation. Blinds can also be included between the sheets of glass if extra privacy is required. Decorative films can be applied to the glass, with, for example, the company logo. There are even glazed partitioning systems where the transparency of the partitions can be altered by flicking a switch.
Glazed partitions are not normally fire rated but can be made more fire rated with special glass. They are, however, easy to relocate if necessary.
Doors are normally glass but can be solid if needed. They can be fitted on patch hinges, floor mounts or sliding rails (where space is at a premium), in frames or frameless systems. They can also be automated if required.
Komfort Polar, MHR Logika 5000, CCF Clarity, Avanti Solare, Avanti Elite, Tenon Vitrage and i Wall are examples of silicon glazed partitioning.
Proprietary Aluminium Systems/Stud Partitioning
Proprietary aluminium system office partitions (also known as Stud Partitioning) are made with single or double layers of normal plaster wallboard fixed each side of the studwork framing. Solid panel joints can be covered with clip-on aluminium sections, which can be SAA or colour coated, or taped and filled to give a seamless flush wall. Some stud partitioning systems use timber trims. Glazed windows can be incorporated into the partitioning, single or double glazed, utilising frames or clip-in PVC glazing beads. These often incorporate venetian blinds.
Doorframes can be proved to match the system framework and fitted with suitable veneered doors and appropriate ironmongery.
This type of office partition is fire rated and can be upgraded utilising a mineral fibre or fibreglass infill to provide good acoustic performance. Stud partitioning is a flexible product that can easily be configured to a particular design and can be finished in a wide range of options whist remaining a relatively cost effective system.
Komfire 75, Komfire 100, Kameo 75, Komfort Mirage, MHR Logika 3000, CCF Prima, CCF Symmetry, Avanti Designer, Avanti Fireshield Tenon Fire & Sound and Tenon Ovation are all examples of proprietary aluminium systems.
Plasterboard/Drywall Partitions
Plasterboard office partitions and walls are non load bearing, and are constructed using dry techniques. They can be used in all types of buildings including private housing, commercial and industrial buildings. The range covers all applications providing simple space division, through to high performance walls designed to meet the most demanding fire resistance, sound insulation, strength, robustness and height requirements.
Plasterboard office partitions and walls are constructed using lightweight materials which can give rise to significant savings in structural design compared to the masonry alternatives. Plasterboard linings are not suitable for use in areas subject to continuously damp or humid conditions. They are also not suitable for use in temperatures above 49°C but can be subjected to freezing conditions without risk of damage.
Plasterboard is designated a 'material of limited combustibility' within the national building regulations. For optimum sound insulation all junctions have to be airtight; this is achieved by sealing all gaps between boards with standard sealant materials.
Plasterboard partitioning is very versatile as it can be used to create either very simple structures or complex partitioning including curved walls. The basic product can be upgraded to increase its fire acoustic or thermal ratings. It is the ideal partitioning to use where unusual height is required such as in lobbies or factory/warehouse sites.
Gyproc, GTEC and Knauf Standard are all examples of plasterboard.
Timber/Wood Partitions
Modular timber partitioning systems produce a practical and creative office environment in a traditional style. This simplified method of building wood partitions ensures complete flexibility and re-locatability to meet the challenges of your 'modern office fitting out' needs.
These systems come with an extensive choice of hardwoods lacquered to enhance the finish and glazing options for partial privacy. Further privacy can also be achieved with the use of venetian blinds. Bespoke partitioning can be created in timber to give a unique look to your workspace.
Timber/wooden partitioning systems can be fire rated and provide superior acoustic protection too.
Komfort Klassic, MHR Logika 4000, CCF Symphonyplus, Avanti Legno and Tenon Scion are examples of this timber partitioning.
Steel Partitions
Steel partitions can be single or double skinned, of solid or mesh construction. This type of partitioning can be used to construct a freestanding structure, for example to create a secure area in a factory. Steel partitions are a cost effective and durable solution.
Higher specification steel partitioning can be used where a clean environment is required. Certain hospital rooms and cleanrooms often have steel partitions for this reason. In addition, they are easy to relocate, light and quick to install.
Komfort Precision and CCF's steel partitioning range are examples of steel partitioning systems.
